home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
ENGINEER
/
2908.ZIP
/
READ.ME
< prev
Wrap
Text File
|
1991-05-05
|
5KB
|
119 lines
.L:66
.XR:4
READ.ME
Copyright 1990, Robert W. Kascak
19 Laurel St., Trumbull, Ct., 06611-3919
Read.me file for 'ANGLES.BAS Ver. 2.0', 'ANGLES.EXE Ver 2.0'
'ANGLES.WKS Ver. 2.0 and related files.
This disk is NOT "freeware" and it is NOT "public domain" It is
a copyrighted software product developed and owned by ROBERT W. KASCAK.
You may receive only a small compensation for the cost of reproducing or
distributing this product. The copyright notice and contents may not be
altered and must remain as they appear in the software. No printed
documentation may be reproduced in any form whatsoever.
You may make backup copies of this disk for your own use and you
may offer copies to others for trial use only, subject to the limitations
in the above paragraph. You may NOT make copies of any printed material
supplied with or in the program or in the documentation.
To support the developement of such programs and future updates,
We would like you to encourage others to register this product for their
own use with a contribution of at least $15.00 plus $2.00 for P/H for 5.25
or $16.00 plus $2.00 for P/H for 3.5 and your name and address with:
Robert W. Kascak
19 Laurel St.
Trumbull, Ct., 06611-3919
Registration entitles you to an updated disc which includes more
drawings and improved directions. It also includes innovations and mod-
ifications that can be made to the containers. On disc is an expanded
spread sheet template/program that can be used with LOTUS 123(tm),
ASEASYAS(c), and others that use the same format. Disk also contains
the source code for the basic program.
Also available are printed sheets, with directions for making
multiple sided containers of up to 24" in diameter and up to 22" deep.
These are in sets of 9 pages according to the number of sides of the
containers (ie: 5-6-8-10-12-16-18-20-24 + sides). The first set with
directions and graphic printouts (Total of 18 pages) are $7.50 plus
$2.00 P/H and each additional set ordered with it is $4.50 ppd. Single
sets are $5.50 each ppd.
Special: 5 sets with directions and graphic printouts on initial
order for $24.00 plus $2.00 P/H.
Page 2
CONTENTS:
This disk contains the following files and their description.
READ.ME The file you are now reading.
ANGLES.EXE The program for supplying the measurments and
angles needed for making compound cuts for multi-
sided boxes, containers, covers, etc. (ver 2.0)
ANGLES.WKS A "WKS" file to be used with Lotus 1-2-3(tm),
Aseasyas(c), and similar spread sheets that can
accommodate these files.
ANGLES.DOC Documentation for the explanation and the use of
file ANGLES.EXE. Ver. 2.0
ANGLES.HLP Documentation for the explanation and the use of
the spreadsheet file ANGLES.WKS Ver. 2.0.
FIGURE01.PIC Graphics file for nomenclature explanation of
parts of containers.
FIGURE02.PIC Graphics file of cutting angles for taller types
of containers.
FIGURE03.PIC Graphics file of cutting angles for shallow
types of containers.
FIGURE04.PIC Graphics file for cutting rabbit for bottom
ANGLES.BAS Source code file of ANGLES.EXE Ver. 2.0
TO RUN SPREADSHEET PROGRAM, LOAD YOUR SPREADSHEET
PROGRAM AND THEN LOAD ANGLES.WKS.
TO RUN CALCULATION PROGRAM, TYPE 'ANGLES' FROM DOS.
FOR 'DOC', 'HLP', 'READ.ME' FILE PRINTOUTS, USE
COPY [filename] PRN
WARRENTY DISCLAIMER WARRENTY DISCLAIMER
These programs are sold on an as-is basis without warrentee of
any kind, either expressed or implied. The purchaser accepts all risk as
to the cost of necessary repair, servicing, and correction arising out of
the use or inability to use these programs. When you use the programs, you
acknowledge that you have read and agree to the terms of this statement and
that it is the last and final agreement between us.
Remember to register for any updated and new versions of this
disk. $15.00 plus $2.00 for P/H for 5.25 in. disk or $16.00
plus $2.00 for P/H for 3.5 in. disk with your name and address.
Please let me know if you find any errors or problems in these
programs. I feel there is room for more do it yourself programs. Do
you have any ideas?
Bob Kascak